Headphones
Jolly Rogers Headphones are
engineered for the beginner and professional coin, relic, gold
nugget, and jewelry hunter.
Technical
Specifications:
- Single rotary volume
control with "stay put" segmented "click" positioning.
- Selector switch
for metal detector compatibility
with all single-output metal detectors without adapters.
- Heavy-duty
muff-to-muff connection cable.
- Heavy-duty coil cable
with special 1/4", 90 degree angle stereo connector.
- Compact carry and
storage foldable design.
- Heavy-duty polymer
muffs with full-ear surround, soft comfortable cushions.
- Adjustable padded
headband... no screws, no wire frame, no rust!
- Speakers designed for
maximum sensitivity, efficiency, durability, and signal quality.
- Special
sound-blocking
muff design eliminating environmental ambient noise up to 20 decibels.
- Frequency response:
150 Hz - 20 kHz... only what your detector uses.
- Impedance: 16 ohms
nominal.
$71.00
The Original
Gray Ghost Headphones are designed for the demanding professional coin,
relic, and jewelry hunter. These phones are built by detector people
for detector people.
Technical
Specifications:
- Single rotary volume
control with "stay put" segmented "click" positioning.
- Selector switch
for metal detector compatibility
with all single-output metal detectors without adapters.
- Heavy-duty
muff-to-muff connection cable.
- Heavy-duty coil cable
with special 1/4", 90 degree angle stereo connector.
- Compact carry and
storage foldable design.
- Heavy-duty polymer
muffs with full-ear surround, soft comfortable cushions.
- Adjustable padded
headband... no screws, no wire frame, no rust!
- Speakers designed for
maximum sensitivity, efficiency, durability, and signal quality.
- Special built-in
signal limiting circuitry to protect hearing from high volume hits...
no batteries!
- Special
sound-blocking
muff design eliminating environmental ambient noise up to 24 decibels.
- Frequency response:
200 - 3200 Hz... only what your detector uses.
- Sensitivity: 72 dB @
1kHz min.
- Impedance: 150 ohms
nominal.
$89.00
Nugget Busters were designed for
the demanding professional electronic prospector and gold nugget
hunter. If you're just getting started in gold hunting, we're sure
you'll never want to use anything but Nugget Busters!
Technical
Specifications:
- Single rotary volume
control with "stay put" segmented "click" positioning.
- Selector switch
for metal detector compatibility
with all single-output metal detectors without adapters.
- Heavy-duty
muff-to-muff connection cable.
- Heavy-duty coil cable
with special 1/4", 90 degree angle stereo connector.
- Compact carry and
storage foldable design.
- Heavy-duty polymer
muffs with full-ear surround, soft comfortable cushions.
- Adjustable padded
headband... no screws, no wire frame, no rust!
- Speakers designed for
maximum sensitivity, efficiency, durability, and signal quality.
- Special
sound-blocking
muff design eliminating environmental ambient noise up to 24 decibels.
- Frequency response:
200 - 3200 Hz... only what your detector uses.
- Sensitivity: 72 dB @
1kHz min.
- Impedance: 150 ohms
nominal.
$89.00
Vanco Deluxe Headphones- Dual Volume
Controls, 8 ohms $35.00
Koss 30 Headphones
- The Koss headphones have been custom built for
Minelab. These excellent headphones give you a crisp clear signal, nice
padded muffs that eliminate outside noise and are very comfortable to
wear all day long. Supplied with a curly cord for safe flexible length.
$49.00
Lifetime Limited Warranty on DetectorPro
Headphones
Jolly Rogers, Gray Ghost, and Nugget Busters
are DetectorPro headphones. DetectorPro headphones are warranted to be free of defects in materials
and workmanship as long as they are owned by the original consumer
purchaser. This warranty is not transferable, and is valid only if the
registration card has been completed and
mailed within 14 days of purchase.
This
warranty gives you specific legal rights, and you may have other rights
which vary from state to state.
During
the first year DetectorPro will, at its option, repair or replace
free of charge, including labor, any part(s) found to be defective
under normal use excluding transportation charges. After one year
from the date of purchase DetectorPro will replace defective parts at
no
charge except a nominal labor charge and transportation charges.
This
warranty excludes headphones that have been abused, altered, or
repaired by an unauthorized person. It also excludes wire breakage due
to improper flexing. If you feel you have a warranty problem call
DetectorPro
to receive your return authorization number. This number must be
displayed on the address label.